Product Reviews

VIVO STAND-V257R Review: A Desk Mount for Two Large Ultrawides

A heavy-duty stacked mount for buyers fitting two very large screens who want flexible positioning and a clamp or grommet installation.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The VIVO Dual Vertically Stacked Ultrawide Monitor Desk Mount review is for anyone planning a vertical setup with two exceptionally large screens and a desk sturdy enough for a substantial clamp mount.

Its 57-inch screen support, high per-screen weight limits, and varied adjustment options make compatibility checks especially important before buying.

VIVO STAND-V257R Review Summary

The quick verdict

VIVO STAND-V257R
4.5/5

2,000+ ratings

Read Amazon Reviews

VIVO STAND-V257R

A heavy-duty stacked mount for buyers fitting two very large screens who want flexible positioning and a clamp or grommet installation.

  • Holds two vertically stacked ultrawide screens up to 57 inches, weighing up to 48.4 pounds each for curved screens or 59.4 pounds each for flat screens.
  • The upper arm can also accommodate a TV up to 43 inches.
  • Adjustment includes +55° to −35° tilt, 132° swivel and 180° rotation on the lower arm, and 360° swivel and rotation on the upper arm.
  • Height adjusts along the center pole.

Pros

  • Designed for two very large ultrawide displays, with a generous maximum screen size and high listed weight capacities.
  • The vertical layout uses one central pole and keeps the screens arranged in a single column.

Consider before buying

  • The C-clamp and grommet mount have relatively narrow stated desk-thickness limits, so many desk edges or existing grommet openings may not fit.
  • The weight maximum depends on whether a screen is curved or flat; buyers must check both that classification and the individual screen weight.
Read the full review summary

The VIVO STAND-V257R is built around a specific use case: two ultrawide displays arranged one above the other.

It supports screens up to 57 inches, with capacity up to 48.4 pounds per curved screen or 59.4 pounds per flat screen, and the upper arm is rated for TVs up to 43 inches.

The broad screen range is paired with multiple VESA patterns, including several larger patterns beyond the common 75 × 75 mm and 100 × 100 mm sizes.

This design is most relevant to people whose displays are too large or heavy for a typical dual-monitor arm and who prefer a vertical arrangement that keeps the screens centered over the desk.

The C-clamp and optional grommet mounting offer two installation approaches, while independent swivel, tilt, and rotation adjustments support positioning each display.

Before purchase, check each screen’s weight, curvature, VESA hole pattern, and the thickness and construction of the intended desk edge.

The buying factors

VIVO STAND-V257R Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Large-screen compatibility

Supports two ultrawides up to 57 inches, with distinct weight limits for curved and flat screens.

9/10

Weight capacity

The listed per-screen maximums are unusually high for a dual desk mount, provided each display falls within the appropriate curved or flat limit.

8/10

Positioning flexibility

Tilt, swivel, rotation, and height adjustment allow substantial control, though the listed movement ranges differ between the upper and lower arms.

8/10

Mounting options

A heavy-duty C-clamp or optional grommet mount provides a choice, with specified maximum desk thicknesses for each.

8/10

VESA compatibility

The supported patterns extend through 200 × 200 mm, but buyers still need to match each monitor’s mounting holes.

7/10

Cable organization

Clips on the center pole offer a straightforward way to route power and AV cords along the upright.

Key Features and Specifications of VIVO STAND-V257R

  • Holds two vertically stacked ultrawide screens up to 57 inches, weighing up to 48.4 pounds each for curved screens or 59.4 pounds each for flat screens.
  • The upper arm can also accommodate a TV up to 43 inches.
  • Adjustment includes +55° to −35° tilt, 132° swivel and 180° rotation on the lower arm, and 360° swivel and rotation on the upper arm.
  • Height adjusts along the center pole.
  • Mounts with a C-clamp to desks up to 1.45 inches thick or an optional grommet mount for surfaces up to 1.26 inches thick.
  • Supports VESA patterns of 75 × 75, 100 × 100, 200 × 100, 100 × 200, and 200 × 200 mm.
  • Cable clips on the center pole help keep power and AV cords routed together.

Pros and Cons of VIVO STAND-V257R

Pros

  • Designed for two very large ultrawide displays, with a generous maximum screen size and high listed weight capacities.
  • The vertical layout uses one central pole and keeps the screens arranged in a single column.
  • Both arms offer rotation and swivel, while the lower arm also provides tilt adjustment.
  • Supports several larger VESA patterns in addition to common small patterns.
  • Includes both a C-clamp installation and an optional grommet mounting approach.

Consider before buying

  • The C-clamp and grommet mount have relatively narrow stated desk-thickness limits, so many desk edges or existing grommet openings may not fit.
  • The weight maximum depends on whether a screen is curved or flat; buyers must check both that classification and the individual screen weight.
  • A vertical stack calls for enough open height and a comfortable viewing position for the upper screen, which depends on the desk and room layout.

Who Should Buy VIVO STAND-V257R?

Good fit

Consider the STAND-V257R if your setup calls for two large ultrawides stacked vertically and both displays fit the applicable weight limits.

Its broad VESA support and separate positioning ranges make it a plausible choice for a workstation where a conventional side-by-side arrangement would take too much horizontal space.

Before ordering, compare each monitor’s exact VESA pattern and weight with the mount’s supported patterns and curved or flat capacity.

Measure the desk edge for the C-clamp, or check that the surface and opening suit the optional grommet mount.

Also map out the total screen height and your seated sightline so the upper display will land at a usable position.

Who should skip it

Skip this design if you need screens side by side, want to place the displays on a freestanding base, or have a desk surface that exceeds the listed clamp and grommet thickness limits.

It is also a poor fit if either display exceeds its applicable weight capacity or uses a VESA pattern outside the listed options; check those measurements before choosing a mount.

What the VIVO STAND-V257R’s stacked design means for your setup

A mount intended for exceptionally large screens

The 57-inch size ceiling and high weight limits position this mount for equipment that many general-purpose dual arms cannot accommodate.

The curved-screen maximum is lower than the flat-screen maximum, so screen size alone is not enough to confirm fit. Verify the weight and curvature of each individual display against the matching limit.

Vertical stacking changes the space calculation

Arranging the screens in one column can keep both centered without requiring a very wide desk, but it uses more vertical space than a single display.

Think through how high the upper display will sit once the lower screen is positioned, and whether the overall arrangement works with your posture, desk depth, and available clearance.

Adjustment ranges vary by arm

Both arms swivel and rotate, but their ranges are not identical: the lower arm has 132° swivel and 180° rotation, while the upper arm has 360° for both. The listed tilt range is +55° to −35°.

These controls give several ways to orient the screens, but buyers should plan the desired final positions around the distinct limits of each arm.

Desk and mounting compatibility need an early check

The clamp supports desk thickness up to 1.45 inches, while the optional grommet mount is specified for surfaces up to 1.26 inches.

Those limits make a quick measurement worthwhile, along with checking how the mount will sit against the desk and whether the intended grommet location is usable.

Cable clips on the center pole can then help keep power and AV leads organized along the upright.

Alternatives to VIVO STAND-V257R

Computer Monitor Arms alternative

VIVO STAND-V120T Dual Ultrawide Desk Mount
4.5/5

2,000+ ratings

Read Amazon Reviews

VIVO STAND-V120T Dual Ultrawide Desk Mount

Choose the STAND-V257R when you need the larger stated screen and weight limits and specifically want a vertical stack.

The STAND-V120T is a better match if screens up to 49 inches and 44 pounds each are sufficient and you prefer a dual-arm arrangement with greater stated desk-thickness allowances.

  • The STAND-V120T is a dual-arm mount for screens up to 49 inches and 44 pounds each.
  • It uses 75 × 75 or 100 × 100 mm VESA patterns and specifies +85° to −25° tilt, 180° swivel, and 360° rotation.
  • Its C-clamp accepts desks up to 1.7 inches thick, and its optional grommet mount accepts surfaces up to 1.5 inches thick.
  • The STAND-V257R stacks two screens vertically and supports ultrawides up to 57 inches, with high per-screen capacity and larger listed VESA options.

Computer Monitor Arms alternative

VIVO STAND-V002L Vertical Dual Monitor Desk Stand
4.6/5

3,000+ ratings

Read Amazon Reviews

VIVO STAND-V002L Vertical Dual Monitor Desk Stand

The STAND-V257R suits buyers with much larger or heavier displays who can use its desk clamp or grommet mounting.

Consider the STAND-V002L if your screens fit its smaller limits and a freestanding base better suits your desk or installation preferences.

  • The STAND-V002L is a freestanding vertical mount for two screens up to 34 inches and 22 pounds each.
  • It has a 15.4 × 12.4-inch base, supports VESA 75 × 75 and 100 × 100 mm, and offers ±45° tilt, 360° swivel, and 360° rotation.
  • The STAND-V257R is a clamp or grommet mount for two ultrawides up to 57 inches, with separate adjustments for its upper and lower arms.

Is VIVO STAND-V257R Worth It?

The VIVO STAND-V257R is worth considering for a two-screen vertical workstation built around large ultrawides. Its strongest case is the combination of a 57-inch screen ceiling, substantial stated weight capacity, broad VESA support, and adjustable arms.

Buy only after checking each screen’s weight, curvature, mounting pattern, and the desk’s fit for the clamp or grommet mount.

If those measurements work and a tall stacked layout fits your viewing position, this mount addresses a specialized setup with a clear, feature-led design.

Your review at a glance

VIVO STAND-V257R
4.5/5

2,000+ ratings

Read Amazon Reviews

VIVO STAND-V257R

A heavy-duty stacked mount for buyers fitting two very large screens who want flexible positioning and a clamp or grommet installation.

  • Holds two vertically stacked ultrawide screens up to 57 inches, weighing up to 48.4 pounds each for curved screens or 59.4 pounds each for flat screens.
  • The upper arm can also accommodate a TV up to 43 inches.
  • Adjustment includes +55° to −35° tilt, 132° swivel and 180° rotation on the lower arm, and 360° swivel and rotation on the upper arm.
  • Height adjusts along the center pole.

Written by

commongroundarlington.com Editorial Team

Editorial team

commongroundarlington.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

VIVO STAND-V257R

VIVO STAND-V257R

A heavy-duty stacked mount for buyers fitting two very large screens who want flexible positioning and a clamp or grommet installation.

  • Holds two vertically stacked ultrawide screens up to 57 inches, weighing up to 48.4 pounds each for curved screens or 59.4 pounds each for flat screens.
  • The upper arm can also accommodate a TV up to 43 inches.
Check Video Reviews on Amazon